Your position: Home / Curing & Whitening

DMX Dental Wireless Curing Light 1 Sec Cure Lamp Woodpecker I LED Style 2800mw

    Please select the information you wantX
(888887 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews
DMX Dental Wireless Curing Light 1 Sec Cure Lamp Woodpecker I LED Style 2800mw
Brand: DMX

This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, the world advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays,
Main Body: 1Pc             Light Source:: 1Pc
Charge Base: 1Pc          Adapter: 1Pc
USB cable: 1Pc               Light Protect: 1Pc
Lens: 5pcs                     Test block:2pcs
3.1 Main Unit
Battery Voltage DC3.7V
Battery Capacity 1500mAh
Wave Length 385~515nm
Light Density P1(9W) ≥ 2300mmw/cm²
Charging time 3 hours approx
Weight 550g
Packing size L205 x W109 x H77mm
3.2AC Adapter
Rated input voltage AC100-240V 50/60Hz
Output voltage DC 5V/MICRO USB
Output current 1A
3.3 Operation Conditions
Environment temperature +5 ℃ ~+40 ℃
Relative humidity 10%~80%RH
Atmospheric pressure 50~106KPa

4.Use Method
4.1 Charge
Put the curing light into the charger base, the blue light is shining one by one. When it is done, all of the blue lights are on.It takes about 3hours. Take care not to charge more than 7hours. Remove the adapter from the power supply after charging.
Note: Can charge with the main unit socket also. When charging, theLED screen show CH; when done, the LED show FU
4.2 Operation Instruction
4.2.1Press M orTbutton to power on.Ifpress ON/OFF button, will light the Light source.
4.2.2 Set up Mode:
P1(9W,≥2300mw/cm²)  The actual measured value 2800mw/cm²
4.2.3 Setup Time:
4.2.4Press ON/OFF button to light on the LED curing light. Ifsome wrong happened, the LED screen shows Er.
4.2.5 The main unit will power off by itselfif without any operation about 2minuts.
Caution: the curing light can not be pointed at the patient's eyes while it is operating. If any accidents happen, go to the hospital immediately
5.1 This machine is precise opticalequipment,it should use in the clean and dry place.
5.2 Remove adapter from the power supply after charge. 5.3 Do not touch the battery electrodes by any metal objects.

6.Cleaning & Sterilization
6.1 Clean
Wipe the main unit with neutral detergent if needed.
6.2 Sterilization
6.2.1 The light source can be high pressure autoclaved. Autoclave it after each use with seal bag.
6.2.2Don't autoclave any parts(the main unit and charging base)other than those that can be subjected to autoclave sterilization.
6.2.3 Autoclave up to a max.135℃. It's recommended to autoclave for 20min at 121℃ or 15 min at 132℃.
Notice: Don't use any solvent such as benzine and thinner for sterilization.

7.Transportation And Storage
1)Lay lightly during transportation, avoid strong shake 2) Storage condition:
a. Ambiance temperature:-10~~40℃b.Relative humidity:≤85%
Average rating: 5.0
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login